Raymarine P66 Transom Mount Transducer
Description
P66 Transom Mount Transducer
Key Features
- Compatible hull material: metal, wood, and fiberglass
- Max Power: 600 watts
- Frequency: 200/50 kHz
- Cable: 30ft (10m) Cable
- Other: Replaceable paddle wheel assembly
Compatible models
- DSM30
- DSM300
Transom Mount Transducers
As the name implies, transom mount transducers are installed on the boat's transom, directly in the water and typically sticking a little below the hull. Transom mounts are composed of plastic and tend to be less expensive than other transducers.
Transom mount transducers are recommended for planing hulls of less than 27 feet (8 meters), such as personal watercraft and powerboats with outboard, inboard-outboard and jet drives. They are not recommended for large or twin screw inboard boats because aerated water from the propeller reduces performance. They are also not recommended for operation at very high speeds. Transom mounts adjust to transom angles from 3° - 16°. For angles greater than 16°, a tapered plastic, wood or metal shim will be needed. However, the transducer should be adjusted so it is angled slightly forward when the boat is in the water.
