Prop Guards Safety Orange 11in

11" Prop Guard® (Safety Orange) fits 25hp to 35hp (except  Big Foot & High Thrust, Require 13")

Prop Guards will fit all Manufacturers Outboards and Stern Drives. Note: All hp's with Big Foot & High Thrust applications require next size up. ALL APPLICATIONS of the 13" and 14" Prop Guards are for  PONTOON AND DECK BOATS, and any other application that the vessel does not exceed 25 mph.

For further advice regarding suitablity of prop guards,please contact us on 01670512291 or the RYA Guidance on Prop Guards for Recreational Boatersmay be of interest.

To obtain optimal performance out of your motor with the Prop Guard® installed,

To obtain optimal performance out of your motor with the Prop Guard® installed, you may need to change your propeller diameter: 9" Prop Guard®  up to 8.5" prop, 11" Prop Guard® up to 10.5" prop, 14" Prop Guard® up to 13.5" prop, and 16" Prop Guard® up to 16" prop. The closer the prop blades are to the Prop Guard® rings, it will optimize your performance, handling and will not create a  drag. Your motor will also have to be trimmed to a setting of optimal performance (Refer to Fig. B). Be sure the Prop Guard® you purchase is the    correct size. Place it on your motor with Grip Clamps first and CHECK  YOUR  CLEARANCES BEFORE DRILLING HOLES AND MOUNTING. Manufacturer will not warrant your Prop Guard® should you drill into Prop Guard® and find you have purchased the wrong size. Above all, please take your time in measuring and  selecting the proper size Prop Guard®. If in any doubt consult us  or bring your motor by for an inspection for proper size.