Rule Fully automatic submersible pump 24v (25SA-24)
Description
Rule Fully Automatic 500 Submersible
Submersible pump 24 volt DC with 750mm cable.
Fully automated bilge pump with computerised operation.
Connections: For 19mm (3/4") bore hose.
Dimensions: 107mm high, 64mm x 74mm.
Current Draw: 0.8(amps)
Fuse Size: 2(amp)
Output: Up to 31 litres/minute (7 gallons/minute) without check valve. Max. recommended discharge head 2m.
Light, compact pump for ski-boats and small vessels.
Tough plastic body with integral strainer.
Quick release inlet strainer allows rapid cleaning.
Low amp draw conserves batteries.
Built-in Thermal Cut-Off. Motor rated for 1500-hour life.
Check Valve included for Back Flow Prevention.
Vented body to prevent air locking.
Threaded port for easier installation and maintenance.
No need for a separate float switch. Third wire for manual override.
Base not interchangeable with old range but can be fitted to existing screw holes.
Packaged Dimensions: L:18.00 x H:9.00 x W:17.00cm
Actual Weight: 0.41 Kg (Approx. 0.61 Kg packed)
Specifications
Size:
Connections: For 19mm (3/4") bore hose.
Dimensions: 100mm high, 60mm base diameter.
Fuse Size: 2.5 amp
Output: Up to 28 litres/minute (6 gallons/minute). Max. recommended discharge head 2m.
Fully automated bilge pump with computerised operation.
Compact pump for smaller vessels.
Tough plastic body.
Quick release inlet strainer allows rapid cleaning.
Low amp draw conserves batteries.
Ignition protected.
No need for a separate float switch.
Third wire for manual override or warning light.
Dimensions:
Packaged Dimensions: L:15.00 x H:8.00 x W:19.00cm
Weight:
Actual Weight: 0.36 Kg (Approx. 0.56 Kg packed)
